Polymath projects are massively collaborative mathematical research programs, in which a single problem, group of problems, or other mathematical task is worked on by a large group of mathematicians. (While most polymath projects to date have been focused on solving a mathematical problem, one can envision other types of polymath projects in the future, e.g. a collaborative reading seminar, or a collaborative mathematical exposition project, or even some collaborative formulation of conjectures.)

The key word here is *collaborative*: this is not a competition to be the first to solve the problem, but is instead a team effort, in which each partial insight or other iota of progress gained by any one participant is shared with the other participants via this blog (and also the wiki).

All interested observers are welcome to jump in and participate in any of these projects, regardless of mathematical level, though it is recommended that one read and understand the guidelines here first.

— Proposing a polymath project —

It seems that polymath projects work better if they are announced well in advance, so that the basic format and strategy can be agreed upon before the flood of research observations begins, and so that interested participants can be as prepared as possible for the official opening of the project (which tends to be a bit chaotic).

Some polymath projects are proposed on this blog, but proposals hosted at other places are also certainly welcome. If you are proposing a project on a wordpress blog, please add the category “polymath proposals” so that it can be found on the wordpress page for that category. If the proposal is not fleshed out enough to merit its own page, it can be placed on the wiki at this location instead.

If you wish to post a proposed project at this blog, please contact one of the administrators of the blog.

An up-to-date list of all active, inactive, and proposed polymath projects can be found on the wiki.

From time to time we may hold a discussion and vote on which proposed project to choose as the next polymath project. As the polymath enterprise is still very new, we do not intend to have more than one highly active polymath project running at any given time, though we do anticipate a continuing low-intensity stream of activity from previously successful (or partly successful) polymath projects.

— Polymath structure —

A polymath project can be hosted either on this blog, or a blog of a host who is willing to administrate and moderate the project. A given polymath project consists primarily of three components:

**The wiki pages for that project.**These pages will be hosted on this site, and will store all the “settled knowledge” for that project, such as the bibliography, notation, finished arguments, open problems, and so forth. Anyone who has registered at that wiki is able to edit these pages.**The research thread for the project.**This is the engine of progress for the project. It is in this thread that ideas will be tossed out and analysed, problem solving strategies discussed, and so forth. Lengthier computations and arguments should be placed on the wiki and summarised on the research thread. In practice, this thread would be mostly used by the “full-time” participants to the project, who are up to speed on all the existing progress on the problem. Typically, this thread will accumulate several hundred comments over the lifetime of the project.**The discussion thread for the project.**This is where the project is managed and evaluated, and where the “casual” participants can catch up and offer feedback. At regular intervals, the moderators (or other active participants) should summarise how the research thread is going by posting updates to the discussion thread. Casual participants are encouraged to ask questions or make requests here about the status, direction, or format of the project. For instance, if the research thread is moving too fast and becoming more chaotic, it might be requested here that more effort go into explaining what has already been achieved, and organising it on the wiki.

Other components to a project may be created as the need arises (e.g. a reading seminar thread to understand a paper of key importance to the project).

Each project will have one or more moderators who can perform various administrative tasks, such as repairing comments with formatting errors, or opening and closing threads. Participants do not always need to wait for a moderator to act on an administrative issue, though; for instance, if there is a need to give a new update on the discussion thread as to the current status of research, you are certainly welcome to write such a summary yourself.

— Commenting policy —

Polymath projects need comments from participants to move forward. As such, we welcome all visitors, regardless of mathematical level, to contribute to active polymath projects by commenting on the threads. However, in order to maximise the positive impact of these comments, the following guidelines should be kept in mind:

**Be polite and constructive.**Polymath projects are team efforts, and any unnecessary conflict between participants is likely to impact that effort negatively. Criticism of a mathematical argument is welcomed, but personal criticisms should be avoided if possible.**Make your comments as easy to understand as possible.**If you have an exciting new idea or argument, by all means share it with the rest of us – but please invest a minute or two to try to make your point clear. For instance, if your argument contains a few messy computations, you might consider writing an initial sentence or two describing the rough strategy of these computations, before plunging into the details; also, please look over these computations and check that they are sensible, and that your terms are well-defined. If necessary, you might revisit a comment and clarify it in a followup comment (or, in case the comment contains some fixable errors, you might contact a moderator to edit the comment).**It’s OK for a mathematical thought to be tentative, incomplete, or even incorrect.**Often, progress on a mathematical problem proceeds by first eliminating some ostensibly plausible approaches; the reason for the failure of the approach is often instructive, and gives clues as to what the correct approach actually is. You are encouraged to toss your ideas out there, but not to be discouraged when others critique that idea. (On the other hand, please don’t be too sloppy; see point #2.)**Excessively technical details should be placed on the wiki, or at another offsite location.**If you wish to make a lengthy and very technical post, you might consider putting it on the wiki instead, and posting just a summary of that post here.**If you are planning to think about some aspect of the problem offline for an extended length of time, let the rest of us know.**A polymath project is supposed to be more than the sum of its individual contributors; the insights that you have are supposed to be shared amongst all of us, not kept in isolation until you have resolved all the difficulties by yourself. It will undoubtedly be the case, especially in the later stages of a polymath project, that the best way to achieve progress is for one of the participants to do some deep thought or extensive computation away from the blog, but to keep in the spirit of the polymath project, it would be good if you could let us know that you are doing this, and to update us on whatever progress you make (or fail to make). It may well be that another participant may have a suggestion that could save you some effort.**An ideal polymath research comment should represent a “quantum of progress”**. On the one hand, it should contain a non-trivial new insight (which can include negative insights, such as pointing out that a particular approach to the problem has some specific difficulty), but on the other hand it should not be a complex piece of mathematics that the other participants will have trouble absorbing. (This principle underlies many of the preceding guidelines.) Basically, once your thought processes reach a point where one could efficiently hand the baton on to another participant, that would be a good time to describe what you’ve just realised on the blog.

Note also that LaTeX is supported in the comments.

— Ratings —

As an experiment, this blog has enabled the ability to rate individual comments “Useful” (Thumbs up) or “Needs Work” (Thumbs down). The idea is to try to identify the comments in a polymath thread which are particularly useful to the research effort, and also to flag those comments which contain mathematical errors or gaps, or require further clarification. Ideally, the ratings should assist participants in “catching up” on all the latest developments in a research thread, by identifying the key breakthrough comments, and also noting which arguments turned out to be incomplete or otherwise in need of work.

One should avoid using the rating system to convey personal opinions about other contributors.

— Publishing policy —

If all goes well, a polymath project may end up with one or more publishable results. If so, the paper will be written collaboratively (using the wiki and blog as appropriate), authored under a polymath pseudonym. (The question of assessing how much of a contribution each participant had to a project seems impossible to answer with any degree of objectivity, so the pseudonym approach to authorship is the simplest solution.)

In some cases, the results will not be sufficiently conclusive to warrant a formal publication; but a writeup might still be made, to be submitted to a preprint server such as the arXiv, if there is a consensus to do so by the participants.

— Acknowledgements —

The guidelines here are based in part on the guidelines to the first polymath project, the guidelines for the first mini-polymath project, and the comments arising from the subsequent analysis of that project.

[…] reminder of the polymath rules might also be placed here, together with a link to the discussion thread for issues relating to […]

Pingback by Mock-up research thread « The polymath blog — July 26, 2009 @ 8:27 pm |

[…] have started the ball rolling on this blog with some proposed rules for running a polymath, a mock-up of what a research thread and a discussion thread for a project would look like, two new […]

Pingback by New polymath blog, and comment ratings « What’s new — July 28, 2009 @ 4:33 pm |

I’m a little confused about the ratings. When you refer to the two possible ratings, do you mean the thumbs up / thumbs down options that appear on these comments here? Namely, are you saying that we should interpret a “thumbs down” as saying “this needs some work” or “there is a flaw”, rather than the typical interpretation of “what a lame comment”? (and likewise for interpreting “thumbs up” ) Or are you talking about a different blog or a different rating system?

Comment by Phi. Isett — August 1, 2009 @ 10:17 pm |

That was the intention, yes, though it seems that people are also using the thumbs up/thumbs down in the usual sense you mention of flagging lame comments (or comments that one especially liked).

Unfortunately, the ratings system as currently implemented on this blog only allows for binary ratings; a multidimensional system (as in Slashdot, for instance) would be better, I think, though I don’t know how easy it would be to implement (this could be part of a wishlist for a future platform, if it turns out that the wordpress platform has reached its limits).

Comment by Terence Tao — August 3, 2009 @ 12:13 pm |

“it seems that people are also using the thumbs up/thumbs down in the usual sense”

Perhaps you could change the images to ✓ and x instead? I do know if too many x’s would discourage some from making more comments, but I don’t think that thumps up/down are the best symbols to describe “correct” and “needs some work”.

Comment by Sune Kristian Jakobsen — August 4, 2009 @ 1:17 pm |

OK, I tried to hack in a tick/cross image, though I was off by a few pixels and so it looks slightly inelegant, especially when one mouses over. If someone would like to do better, the template image is at

http://support.files.wordpress.com/2009/07/red-star.png?w=32&h=48

This is a 2 x 3 array of 16-px x 16-px images. The middle row is irrelevant for this type of rating system. The top and bottom rows need to consist of a tick and a cross. If they don’t align perfectly, there will be a noticeable shift during the mouseover.

Comment by Terence Tao — August 4, 2009 @ 2:57 pm |

I also get very little real information from the ratings, and even worse, I suspect that whether or not one expresses any opinion at all depends on the reader’s mood at the moment, further diluting their meaning. Moreover, we have no idea how many people are actually reading the comment. If there are 6 thumbs up and thumbs down, but 150 total readers, then what does that mean?

I suspect that I will get a number of thumbs down for this comment by the spectators in the coliseum.

Comment by Richard — August 4, 2009 @ 2:51 am |

[…] (Research thread II) Deterministic way to find primes Filed under: finding primes, research — Terence Tao @ 3:57 am Tags: polymath4 This thread marks the formal launch of “Finding primes” as the massively collaborative research project Polymath4, and now supercedes the proposal thread for this project as the official “research” thread for this project, which has now become rather lengthy. (Simultaneously with this research thread, we also have the discussion thread to oversee the research thread and to provide a forum for casual participants, and also the wiki page to store all the settled knowledge and accumulated insights gained from the project to date.) See also this list of general polymath rules. […]

Pingback by (Research thread II) Deterministic way to find primes « The polymath blog — August 9, 2009 @ 4:15 am |

[…] visit and work on the wiki page to organise the progress made so far. This project will follow the general polymath rules. In […]

Pingback by Minipolymath2 project: IMO 2010 Q5 « The polymath blog — July 8, 2010 @ 3:56 pm |

[…] you can see in the above link, Tao started a mini-polymath project about problem 5. So here you can see how a group of mathematicians worked together to solve […]

Pingback by IMO 2010 « Absolutely useless — July 23, 2010 @ 9:07 pm |

[…] open (such as these ones), and how to write papers (such as this one that’s in progress). The Polymath project sought rules for good behaviour which seemed to work. The Ostrom guidelines are a nice take, from a […]

Pingback by The Ostrom Rules and Online Projects « Intermolecular — October 13, 2010 @ 1:05 pm |

[…] please feel free to chip in your opinion on the various proposed icons.) The project will follow the usual polymath rules (as summarised for instance in the 2010 mini-polymath […]

Pingback by Mini-polymath 3: 2011 IMO question « What’s new — June 10, 2011 @ 12:49 am |

[…] and work on the wiki page to organise the progress made so far. This project will follow the general polymath rules. In […]

Pingback by Minipolymath3 project: 2011 IMO « The polymath blog — July 19, 2011 @ 12:05 pm |

[…] Medalist Mathematician Terence Tao proposed the polymath project and wrote about his experiences as a math blogger in the book Poincaré’s legacies : pages […]

Pingback by Open Science as a Research Accelerator « Kresge Physical Sciences Library — October 13, 2011 @ 5:24 pm |

[…] and work on the wiki page to organise the progress made so far. This project will follow the general polymath rules. In […]

Pingback by Minipolymath4 project: IMO 2012 Q3 « The polymath blog — July 12, 2012 @ 10:00 pm |

[…] is welcome to participate in this project (as per the usual polymath rules); however I would request that “meta” comments about the project that are not directly […]

Pingback by Online reading seminar for Zhang’s “bounded gaps between primes” | What's new — June 4, 2013 @ 8:44 pm |

[…] to post half-baked insights to make progress. Some important guidelines can be found here General polymath rules | The polymath blog. Please ignore the 'Polymath Structure' section on this page. __________________ THE PROBLEM. […]

Pingback by MHB's First Polymath Project. — January 3, 2014 @ 8:16 am |

My partner and I stumbled over here different web address and thought I might as

well check things out. I like what I see so now i’m following you.

Look forward to looking over your web page again.

Comment by cách vào m88 khi bị chặn — January 11, 2017 @ 9:31 am |